Mid Mounted Bigger Balancer for reduced Engine vibrations and Smooth Running.
Improved Harness Set with Heat Shrinkage Sleeves & Water Proof Couplers.
Robust Straddle Rear Axle with Epicyclical Reduction Unit.
Durable & Highly Efficient Low Noise Engine.
New Aerodynamic look with Stylish Wrapper & Gill.
Oil Cooler Added for Effective Cooling.
Heavy Duty Front Axle & Support.
New Spring Suspension Deluxe Seat.
Hydrostatic Power Steering.
Smart Steering Wheel for Reduced Steering Effort.
Specifications of MF 375 Tractor:
PERFORMANCE
Engine power at 2,200 rpm: 75 (B.S) hp*
Torque at 1,400 rpm: 290 Nm
PTO power at rated engine speed: 69.5 hp**
PTO power at 540 rpm 63.0 hp
Engine certified to BS.AU 141a: (1971) Manufacturer’s estimate
ENGINE
Type: Diesel / 4.41
No. of cylinders: 04
Injection: Direct
Bore: 101 mm
Stroke: 127 mm
Capacity (litres): 4.1
Aspiration: Natural
Compression ratio: 15.3:1
Starting aid: Thermostart
Throttle control: Hand and foot
Cooling: Water
Air Cleaner Type: Oil bath
Air Pre-Cleaner: Over bonnet
Fuel filter: Dual, high capacity
Exhaust: Vertical muffler under bonnet
Oil Cooler: Water Cooled
POWER TAKE OFF (PTO)
Type: Live
Engine speed at 540 PTO: 1,789 rpm
Shaft diameter: 35 mm
No. of splines: 6
HYDRAULICS
Functions: Draft control, Position control, Response Control, Constant pumping
Pump Type: Reciprocating Ferguson Pump
Oil Flow: 16.7 L/ min
Pressure: 21.2 MPa at normal operating temperature
Lift capacity with lower links horizontal: 2,145 kg
Lower links: With Cat. I & II interchangeable balls
WEIGHTS AND DIMENSIONS
(With 7.50-16 front & 16.9/ 14-30 rear wheel and with full fuel, oil and water)
Gross Weight: 2,295 kg
Dimensions
Wheel base: 2,170 mm
Overall length: 3,670 mm
Width (min.): 1,970 mm
Height
Over Exhaust: 2,485 mm
Over Steering: 1,730 mm
Turning circle
With brakes: 7,260 mm
Without brakes: 8,095 mm
Ground clearance: 501 mm (Under gear box)
ELECTRICS
Voltage: 12V, Negative Earth
Battery: 118 Ah
Starter Motor: 2.8 kW
Alternator: 45 Amp
CLUTCH
Type: Dual clutch
Diameter: 305×254 mm
Lining material: Cerametallic
TRANSMISSION
Type: Sliding spur
Number of gears 8 forward, 2 reverse Road speed at 2,200 engine rpm with 16.9/14-30 rear tyres.
Gear Speed (km/hr)
Forward 1: (first low) 2.65
Forward 2: 3.89
Forward 3: 5.32
Forward 4: 7.14
Forward 5: (first high) 10.62
STEERING
Type: Hydrostatic
FRONT AXLE
Type: Heavy Duty Box Section, Adjustable
REAR AXLE AND BRAKES
Axle Type: Straddle with epicyclic reduction unit
Brake Type: Oil immersed, multi-disc
Brake Pedal: Pendant
Braking Area: 1,774 sq.cm
Brakes Actuation: Hydraulic
Parking Brake: Hand lever operated
INSTRUMENTATION
Gauges: Tachometer, Hour meter, Fuel level, Battery condition & Water temperature
Warning lights: Direction indicators, Electric charge, Headlight main beam, Low engine oil pressure, Brake lights & Auxiliary
TYRES
Front: 7.50-16 (6PR)
Rear: 16.9/14-30 (6 PR)
CAPACITIES (Liters)
Fuel Tank: 108.0 2
Engine sump: 7.5
Cooling system: 15.2
Hydraulic system: 36.0
Hydrostatic steering reservoir: 2.0
Oil bath air – cleaner: 0.7
Brake Oil: 0.25
STANDARD EQUIPMENT
Weight frame without weights, Standard tool box with set of tools, Top link, Top link end Cat-I, & II balls, Check Chains, Stabilizer Chains, Spring suspension seat, Flat top fenders & Operator’s and service manual.
OPTIONAL EQUIPMENT
Front end weights, swinging drawbar, sun canopy, pintle hook and hole drawbar.
